75.160.30 – Gaseous fuels – PDF Standards Store ?u= Wed, 06 Nov 2024 05:12:50 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 ?u=/wp-content/uploads/2024/11/cropped-icon-150x150.png 75.160.30 – Gaseous fuels – PDF Standards Store ?u= 32 32 NZS 5435:1996:1997 Edition ?u=/product/publishers/snz/nzs-54351996/ Wed, 06 Nov 2024 05:12:50 +0000 Specification for liquefied petroleum gas (LPG)
Published By Publication Date Number of Pages
SNZ 1997-02-18 19
]]> Sets out composition and other requirements for commercial propane, commercial butane, general product and special product.

]]> NZS 5422.1:1987 ?u=/product/publishers/snz/nzs-5422-11987/ Wed, 06 Nov 2024 05:12:41 +0000 Code of practice for the use of LPG and CNG fuels in internal combustion engines - LPG fuel
Published By Publication Date Number of Pages
SNZ 1987-08-30 40
]]> Applies to the design, construction, installation, operation, maintenance and fuelling of liquefied petroleum gas (LPG) systems where LPG is used either wholly or in part as a fuel for internal combustion engines. Covers the special requirements of industrial trucks and forklifts.

]]> NZS 5266:2014 ?u=/product/publishers/snz/nzs-52662014/ Wed, 06 Nov 2024 05:12:38 +0000 Safety of gas appliances
Published By Publication Date Number of Pages
SNZ 2014-06-19 38
]]> Sets out the essential safety requirements for all gas appliances in New Zealand that are not subject to a recognised certification regime. The standard is not a design code and therefore it does not address matters of performance, appearance, or durability except where they are relevant to safety. The requirements are intended to protect persons, domestic animals and property from fire, explosion, release of noxious gases, and physical injury hazards that may arise from gas appliances. This standard was first issued in 2011 as an interim standard. After minor changes in 2012 it was reissued for a further period of comment. The changes added to the list of characteristics to be assessed in A2.2 and in C2.2.2 affirmed the validity of tests using Australian test gases for natural gas. In 2014 the development committee decided that the interim standard should be confirmed as a full standard with a minor change to A2.1 to clarify requirements relating to gas appliance testing using LPG line gas. A small change has also been made to item 27 in the checklist in D1 by removing reference to NZ limit gases and simply requiring that combustion tests are satisfactory.

]]> NZS 5256:2014 ?u=/product/publishers/snz/nzs-52562014/ Wed, 06 Nov 2024 05:12:33 +0000 Verification of the safety of gas appliances
Published By Publication Date Number of Pages
SNZ 2014-06-19 28
]]> Provides specific information for verifying the safety of portable gas appliances and gas appliances not installed in existing gas installations. It includes a checklist and appropriate means of achieving and demonstrating compliance. The intention of this Standard is to provide a consistent procedure, suitable for citation in the Gas (Safety and Measurement) Regulations, for assessing and reporting the condition of gas appliances.

]]> NZS 5228.1:1987 ?u=/product/publishers/snz/nzs-5228-11987/ Wed, 06 Nov 2024 05:12:32 +0000 Code of practice for the production and use of biogas, farm scale operation - Production of biogas
Published By Publication Date Number of Pages
SNZ 1987-12-30 40
]]> Provides information to enable planning, design and construction of a farm scale biogas plant and to assist in its safe and efficient operation. Describes the process of biogas production.

]]> NZS 5228.2:1987 ?u=/product/publishers/snz/nzs-5228-21987/ Wed, 06 Nov 2024 05:12:32 +0000 Code of practice for the production and use of biogas, farm scale operation - Uses of biogas
Published By Publication Date Number of Pages
SNZ 1987-12-30 28
]]> Provides information on the utilization of the biogas produced by the plant.

]]> JIS K 2301:2008 ?u=/product/publishers/jis/jis-k-23012008/ Wed, 06 Nov 2024 02:31:36 +0000 Fuel Gases and Natural Gas - Methods for Chemical Analysis and Testing
Published By Publication Date Number of Pages
JIS 2008-07-20 134
]]> This Standard specifies the chemical analysis methods of general components and special components, and the testing methods of the calorific value and the specific gravity of the fuel gas and the natural gas; however, it is not applicable to the liquefied petroleum gas1) and the liquefied natural gas2).

The contents of this specification shall be applicable from July 31st, 2008.

NOTE: The International Standards corresponding to this Standard are as follows.

ISO 6326-1:1989 Natural gas-Determination of sulfur compounds-Part 1: General introduction

ISO 6327:1981 Gas analysis-Determination of the water dew point of natural gas-Cooled surface condensation hygrometers

ISO 6974-1:2000 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 1: Guidelines for tailored analysis

ISO 6974-2:2001 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 2: Measuring-system characteristics and statistics for processing of data.

ISO 6974-3:2000 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 3: Determination of hydrogen, helium, oxygen, carbon dioxide and hydrocarbons up to c8 using two packed columns

ISO 6974-4:2000 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns

ISO 6975-5:2000 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 5: Determination of hydrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns

ISO 6975-6:2000 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 TO C8 hydrocarbons using three capillary columns

ISO 6975:1997 Natural gas-Extended analysis-Gas-chromatographic method

ISO 6976:1995 Natural gas-Calculation of calorific values, density, relative density and Wobbe index from composition

(Overall evaluation:MOD)

In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standards and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/IEC Guide 21.

Notes 1) The liquefied petroleum gas means the liquefied fuel gas or industrial source gas of which the main component is propane, propylene, butane or butylene (see JIS K 2240).

2) The liquefied natural gas means the natural gas of the liquefied state.

]]> JIS K 2301:2008/Amendment 1:2009 ?u=/product/publishers/jis/jis-k-23012008-amendment-12009/ Wed, 06 Nov 2024 02:31:35 +0000 Fuel gases and natural gas-Methods for chemical analysis and testing (Amendment 1)
Published By Publication Date Number of Pages
JIS 2009-10-20 5
]]> This Standard specifies the chemical analysis methods of general components and special components, and the testing methods of the calorific value and the specific gravity of the fuel gas and the natural gas; however, it is not applicable to the liquefied petroleum gas1) and the liquefied natural gas2).

The contents of this specification shall be applicable from July 31st, 2008.

NOTE: The International Standards corresponding to this Standard are as follows.

ISO 6326-1:1989 Natural gas-Determination of sulfur compounds-Part 1: General introduction

ISO 6327:1981 Gas analysis-Determination of the water dew point of natural gas-Cooled surface condensation hygrometers

ISO 6974-1:2000 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 1: Guidelines for tailored analysis

ISO 6974-2:2001 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 2: Measuring-system characteristics and statistics for processing of data.

ISO 6974-3:2000 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 3: Determination of hydrogen, helium, oxygen, carbon dioxide and hydrocarbons up to c8 using two packed columns

ISO 6974-4:2000 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns

ISO 6975-5:2000 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 5: Determination of hydrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns

ISO 6975-6:2000 Natural gas-Determination of composition with defined uncertainty by gas chromatography-Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 TO C8 hydrocarbons using three capillary columns

ISO 6975:1997 Natural gas-Extended analysis-Gas-chromatographic method

ISO 6976:1995 Natural gas-Calculation of calorific values, density, relative density and Wobbe index from composition

(Overall evaluation:MOD)

In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standards and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/IEC Guide 21.

Notes 1) The liquefied petroleum gas means the liquefied fuel gas or industrial source gas of which the main component is propane, propylene, butane or butylene (see JIS K 2240).

2) The liquefied natural gas means the natural gas of the liquefied state.

]]> JIS K 2240:2013 ?u=/product/publishers/jis/jis-k-22402013/ Wed, 06 Nov 2024 02:31:17 +0000 Liquefied Petroleum Gases
Published By Publication Date Number of Pages
JIS 2013-03-21 125
]]> This Standard specifies liquefied petroleum gases used as fuels for households, business, industries, automobiles and the like, and as raw materials for industries.

NOTE: The International Standards corresponding to this Standard and the symbol of degree of correspondence are as follows.

ISO 3993: 1984 Liquefied petroleum gas and light hydrocarbons-Determination of density or relative density-Pressure hydrometer method

ISO 4256: 1996 Liquefied petroleum gases-Determination of gauge vapour pressure-LPG method

ISO 4257: 2001 Liquefied petroleum gases-Method of sampling

ISO 6251: 1996 Liquefied petroleum gases-Corrosiveness to copper-Copper strip test

ISO 7941: 1988 Commercial propane butane-Analysis by gas chromatography

ISO 8973: 1997 Liquefied petroleum gases-Calculation method for density and vapour pressure

ISO 9162: 1989 Petroleum products-Fuels (class F)-Liquefied petroleum gases-Specifications (overall evaluation: MOD)

In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standards and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/ lEC Guide 21-1.

WARNING The liquefied petroleum gases specified in this Standard, if not handled or used with adequate precautious measures, can cause dangers.

This Standard does not purport to address all of the safety problems associated with the use of liquefied petroleum gases.

It is the responsibility of the user of this Standard to determine rules of operation in accordance with the related laws and regulations, and to take adequate preventive measures for safety and health practice prior to use.

]]> JIS K 2240:2007 ?u=/product/publishers/jis/jis-k-22402007/ Wed, 06 Nov 2024 02:31:16 +0000 Liquefied Petroleum Gases
Published By Publication Date Number of Pages
JIS 2007-03-20 116
]]> Liquefied Petroleum Gases
Published By Publication Date Number of Pages
JIS 2007-03-20 116
]]>