ASTM-F2527 2005
$40.63
F2527-05e1 Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
| Published By | Publication Date | Number of Pages |
| ASTM | 2005 | 5 |
1.1 This specification covers the requirements for wrought seamless and welded and drawn cobalt alloy small diameter tubing used for the manufacture of surgical implants. Material shall conform to the applicable requirements of Specifications F 90, F 562, F 688, F 1058 or F 1537, Alloy 1. This specification addresses those product variables that differentiate small diameter medical tubing from the bar, wire, sheet and strip product forms covered in these specifications.
1.2 This specification applies to straight length tubing with 0.250 in. (6.3 mm) and smaller nominal outside diameter (OD) and 0.030 in. (0.76 mm) and thinner nominal wall thickness.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents |
| 2 | Terminology General Requirements for Delivery Ordering Information Materials and Manufacture Chemical Composition Mechanical Properties TABLE 1 |
| 3 | Permissible Variation in Dimensions Permissible Outer and Inner Surface Imperfections Special Tests TABLE 2 |
| 4 | Certification Quality Program Requirements Keywords X1. RATIONALE X1.1 X1.2 X1.3 X1.4 Precision and Bias X1.5 X1.6 |
| 5 | X1.7 X2. BIOCOMPATIBILITY X2.1 |
Related products
-
ASTM-F2524 2006
F2524-06 Standard Practice for Determination of Volatile Content for Formed-in-Place Gaskets (FIPG) Silicone Adhesives and…
-
ASTM-F2427 2004
F2427-04 Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft…
-
ASTM-F2257 2009
F2257-09 Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small…
-
ASTM-F2527 2005
F2527-05 Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing…
-
ASTM-F2507 2005
F2507-05 Standard Specification for Recreational Airpark Design Published By Publication Date Number of Pages ASTM…
-
ASTM-D2527 2006
D2527-83(2006) Standard Specification for Rubber Seals—Splice Strength Published By Publication Date Number of Pages ASTM…
-
ASTM-F2523 2007
F2523-07e1 Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers Published By Publication Date Number…
-
ASTM-F2427 2008
F2427-05a(2008) Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft…
-
ASTM-E2527 2009(Redline)
E2527-09 Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under…
-
ASTM-E2527 2015
E2527-15 Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under…
-
ASTM-F2520 2005
F2520-05 Standard Specification for Reach-in Refrigerators, Freezers, Combination Refrigerator/Freezers, and Thaw Cabinets Published By Publication…
-
ASTM-F2547 2006
F2547-06 Standard Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of…
-
ASTM-F2327 2008(Redline)
F2327-08 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of…
-
ASTM-F2523 2005
F2523-05 Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers Published By Publication Date Number…
-
ASTM-F2523 2007
F2523-07 Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers Published By Publication Date Number…
-
ASTM-D2527 2001
D2527-83(2001) Standard Specification for Rubber Seals-Splice Strength Published By Publication Date Number of Pages ASTM…
-
ASTM-F2027 2000
F2027-00 Standard Guide for Characterization and Testing of Substrate Materials for Tissue-Engineered Medical Products Published…
-
ASTM-F2537 2006
F2537-06 Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion Published…
-
ASTM-F2427 2005
F2427-05 Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft…
-
ASTM-E2527 2009
E2527-09 Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under…
-
ASTM-E2527 2006
E2527-06 Standard Test Method for Rating Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems…
-
ASTM-F2577 2006
F2577-06 Standard Guide for Assessment of Materials and Products for Declarable Substances Published By Publication…
-
ASTM-F2507 2015
F2507-15 Standard Specification for Recreational Airpark Design Published By Publication Date Number of Pages ASTM…
-
ASTM-F2528 2006
F2528-06 Standard Test Methods for Enteral Feeding Devices with a Retention Balloon Published By Publication…
-
ASTM-F2327 2008
F2327-08 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of…
-
ASTM-F2522 2005
F2522-05 Standard Test Method for Determining the Protective Performance of a Shield Attached on Live…
-
ASTM-F2327 2003
F2327-03 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of…
-
ASTM-F2257 2003
F2257-03 Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small…
-
ASTM-F2227 2002
F2227-02 Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Medical Packaging…
-
ASTM-F2027 2008(Redline)
F2027-08 Standard Guide for Characterization and Testing of Raw or Starting Biomaterials for Tissue-Engineered Medical…
-
ASTM-F2227 2007
F2227-02(2007) Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Medical Packaging…
-
ASTM-F2327 2015(Redline)
F2327-15 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of…
-
ASTM-F2027 2000
F2027-00e1 Standard Guide for Characterization and Testing of Substrate Materials for Tissue-Engineered Medical Products Published…
-
ASTM-F2427 2005
F2427-05a Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft…
-
ASTM-F2507 2015(Redline)
F2507-15 Standard Specification for Recreational Airpark Design (Redline) Published By Publication Date Number of Pages…
-
ASTM-F2727 2009
F2727-09 Standard Guide for Manufacturers for Labeling Headgear Products Published By Publication Date Number of…
-
ASTM-F2327 2015
F2327-15 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of…
-
ASTM-F2523 2007(Redline)
F2523-07e1 Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers (Redline) Published By Publication Date…
-
ASTM-F2567 2006
F2567-06 Standard Practice for Testing for Classical Pathway Complement Activation in Serum by Solid Materials…
-
ASTM-F2257 2009(Redline)
F2257-09 Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small…
