ASCE 9780784408308 2006
$118.63
Earth & Space 2006
Published By | Publication Date | Number of Pages |
ASCE | 2006 | 1397 |
This collection contains 176 papers presented at the 10th Biennial International Conference on Engineering, Construction, and Operations in Challenging Environments and Second NASA/ARO/ASCE Workshop on Granular Materials in Lunar and Martian Exploration, held in League City/Houston, Texas, March 5-8, 2006.
PDF Catalog
PDF Pages | PDF Title |
---|---|
1 | Cover |
13 | Contents |
26 | Advanced Aerospace Systems Aerospace Structures, Quantitative Methods Probabilistic Structural Evaluation of Uncertainties in Radiator Sandwich Panel Design |
34 | Sensor Placement for Aerospace Vehicle Health Monitoring Systems |
42 | Acoustic Testing of Hollow Core Fairing Designs |
50 | Design of “Assessment and Decision Aiding Software for Application in High Risk Fields” with a Case Study: The Challenger Tragedy |
58 | Wind Tunnel Investigation of Grid Finned Missile Configuration over Planar Control Surfaces |
65 | Deployable Structures I A New Design Variant of the Large Deployable Space Reflector |
73 | Membrane and Thin Shells for Space Reflectors |
81 | Dynamic Characterization for Multi-Layer Membrane Space Altimeter |
89 | Deployable Structures II SAR Membrane Tensioning |
97 | Numerical Simulations of a Deployable Structure |
103 | Cable Vibration Control with a Magnetorheological Fluid Based Tuned Mass Damper |
111 | Dynamics and Controls of Aerospace Structures Lumped and Distributed Parameter Models of a Spacecraft with Elastic Appendages: Exact Frequencies and Mode Shapes |
119 | Effect of Wall on Mixing of Low Speed Multiple Rectangular Jets |
129 | Experimental and Computational Studies on Delta Wing Configurations with Different Leading Edge Profiles |
139 | Enabling Technologies for Space Exploration and Transportation Infrared Aircraft Deicing System |
145 | Space Power Grid—Evolutionary Approach to Space Solar Power |
150 | Accuracy Requirements for Cannon-Launched Space Missions |
158 | Preliminary Mission Study: Mass Driver for Earth-Bound Asteroid Threat Mitigation |
166 | Granular Materials in Lunar and Martian Exploration (The 2[sup(nd)] Workshop) Cratering Cratering by a Subsonic Jet Impinging on a Bed of Loose Particles |
174 | Functional Scaling for the Cratering of a Granular Surface by an Impinging Jet |
180 | Granular Flow Particle-to-Particle Interaction during Shearing of Granular Materials |
188 | Contrasting Terrestrial and Lunar Gravity: Angle of Repose and Incline Flows |
196 | Lunar and Martian Dust, Modeling and Mitigation Image-Based Modeling of Lunar Soil Simulant for 3-D DEM Simulations |
204 | Charged Dust Dynamics near the Lunar Surface |
209 | A Layered Architecture for Mitigation of Dust for Manned and Robotic Space Exploration |
217 | Lunar Simulants as Feedstocks for ISRU Processing: Mineralogy and Chemistry |
225 | Submicron Particle Size Distribution of Apollo 11 Lunar Dust |
231 | Modeling Issues for Granular Material Micromechanical Modeling of the Interaction of a Soil-Rigid Wheel System |
239 | Footprints: The Role of Particle Characteristics |
246 | Modeling Methodology A Model for Large Scale Near-Real Time Simulation of Granular Material Flow |
254 | Injecting Particle Scale Physics into Continuum Models of Granular Materials for Large-Scale Applications |
262 | On the Behavior of Granular Materials in Rough Wheel Contacts on Mars |
270 | Property Measurements, Computational Multiscale Analysis of the Effects of Changing Gravity on Stress Propagation in a Material Subject to an Indenting Rigid Flat Punch |
278 | Evolution of Contact Forces, Fabric, and their Collective Behavior in Granular Media under Deformation: A DEM Study |
286 | Simulation of Agglutinates Formation |
293 | Determination of Axial Stress and Deformation Variations in a Cylindrical Bed of Granular Material with Applications in Space |
302 | Property Measurements, Experimental Cam Cap Models for Lunar Soil: A First Look |
309 | Morphology and Physical Characteristics of Apollo 17 Dust Particles |
315 | Lunar Regolith Geotechnical Properties: Implications for Exploration |
322 | Structure/Machine/Tool–Soil Boundary Concept of Virtual Soil Bin by DEM for Lunar Locomotion Studies |
330 | How to Swim in Sand |
338 | Human Exploration and Development of Space Advanced Life Support Systems I Abiotic Ammonia Mass Transfer in a Biotrickling Filter |
347 | Macro- and Micro-Scale Contaminant Removal and Resource Recovery from Urine via the Freeze Concentration Process |
355 | Thermophilic Aerobic Solid Waste Processing for Long-Term Crewed Missions |
363 | Advanced Life Support Systems II Treatment of an Early Planetary Base Wastestream in a Rotating Hollow Fiber Membrane Reactor |
369 | A Novel Membrane Bioreactor for Spacecraft Water Recycling |
375 | Exploration and Utilization of Space Returning to the Moon: Resources, Future Development, and Colonization |
382 | Space Traffic Control Mission Assurance |
390 | A Lunar Miner Design: With Emphasis on the Volatile Storage System |
398 | Asteroid/Comet Classification for Mining Purposes |
406 | Multiphase Flow in Space Exploration Systems Bubbles and Droplets in Tubing in Reduced Gravity |
414 | Fundamental Characteristics of Granular Flow Under Variable g-Levels |
419 | Two Phase Flow Analysis on Filling Processes of Microfluidic/Microarray Integrated Systems |
425 | Space Engineering and Construction Curing of Surfaces Formed by Tailored Force Fields |
430 | “All Up” Analog Simulations: Why They are Essential for Planning Long Duration Human Missions to the Moon and Mars |
438 | Space Business, Commerce, Tourism, and Law Space Commerce and Space law: Making the Twain Meet |
446 | Crossing the Infinite Frontier: An Analysis of Property Rights Regime in Corpus Juris Spatialis |
454 | Public Attitudes Toward Different Space Goals: Building Public Support for the Vision for Space Exploration (VSE) |
461 | Lunar and Martian Bases and Exploration (LMBE) Advanced Concepts for Habitat and Exploration The Surface Endoskeletal Inflatable Module (SEIM) |
469 | Advantages of Modularity and Commonality in a Spacecraft Architecture |
475 | Analysis of a 3D Frame—Membrane Structure for Lunar Base |
483 | Growth in Reticulated Undulating Biospheres: A Model for Flexible Initial Deployment Greenhouse Systems for Lunar and Martian Exploration |
490 | Instruments, Sensors, and Techniques to Characterize Planetary Regolith A Proposal for Estimating Strength Parameters of Lunar Surface from Soil Cutting Resistances |
498 | Test Results of Core Drilling in Simulated Ice-Bound Lunar Regolith for the Subsurface Access System of the Construction and Resource Utilization eXplorer (CRUX) Project |
506 | Neutron Probes for the Construction and Resource Utilization eXplorer (CRUX) |
514 | Lunar and Martian In-Situ Resource Utilization Microwave Processing Apollo Soil: Products for a Lunar Base |
522 | Microwave Induced Carbothermic Reduction of Iron Oxides in Lunar Soil Simulant |
528 | Data Fusion Methods Applied to the Construction and Resource Utilization eXplorer (CRUX) Instruments to Characterize Regolith Hydrogen Resources |
536 | Lunar and Martian Habitats Utilizing In-Situ Resources Development and Application of Lunar “Concrete” for Habitats |
544 | Lunar In Situ Materials-Based Habitat Technology Development Efforts at NASA/MSFC |
552 | Optimal Evolutionary Computational Parameters for Habitat Structures Optimization |
560 | Inflatable and Deployable Structures for Surface Habitat Concepts Utilizing In-Situ Resources |
568 | Meteoroid Risk Assessment of Lunar Habitat Concepts |
576 | Lunar/Mars H[sub(2)]O Resource Potential and Proposed H[sub(2)]O Extraction Techniques Accessible Water on Mars and the Moon |
587 | Sublimation Extraction of Mars H[sub(2)]O for Future In-Situ Resource Utilization |
595 | Numerical and Experimental Modeling of Lunar and Martian Soil Simulants Water Release from Shaken Silica Substrates in a Catalytic Reactor |
603 | Discrete Element Modeling of Polyhedral Representation of Granular Materials |
612 | Lunar/Mars Mission Planning Structures for Manned Habitation |
620 | Modular Facility Selection and Configuration Considerations for Lunar/Mars Surface Bases |
630 | Operational Strategies and Capabilities for Habitation Systems in the Exploration of the Lunar Surface |
642 | Definition and Development of Habitation Readiness Level (HRLs) for Planetary Surface Habitats |
650 | Spacecraft Recovery Port Concepts |
656 | Lunar/Mars Surface Architectures Design Concepts for Interior Configurations of Lunar/Mars Inflatable Habitat Modules |
664 | Lunar Surface Scenarios: Habitation and Life Support Systems for a Pressurized Rover |
672 | Planning and Concept Development Operational Strategies and Critical Capabilities for Human Sortie Missions on the Lunar Surface |
680 | A Moon is a Terrible Thing to Waste: A Case for Lunar Master Planning |
686 | Application of Site Analysis to Enhance Lunar and Mars Expeditionary Base Design |
692 | Properties of Lunar Regolith and Simulants Characterizing Granular Material Constitutive Behavior Using SelfSim with Boundary Load-Displacement Measurements |
700 | Arching Prediction in Granular Materials with a Nonlinear Yield Condition |
708 | A Review of Geotechnical Properties of Lunar Regolith Simulants |
714 | New Frontiers in Technology Field Sensing and Robotics I Design and Mobility Evaluation of a Crawler-Type Lunar Vehicle |
722 | Autonomous Robot for Pavement Construction in Challenging Environments |
730 | Mixed Reality—Enhanced Operator Interface for Teleoperation Systems in Unstructured Environment |
738 | Direction for Space Construction Robot: Challenges in the Millennium |
746 | A Robot Supervision Architecture for Safe and Efficient Space Exploration and Operation |
754 | Field Sensing and Robotics II Design and Modeling of the NU Smart Space Drilling System (SSDS) |
762 | Modeling Lunar Architectures Using 3D Real-Time Visualization and Simulation |
770 | Human Assistant Planetary Exploration Robots |
778 | Performance-Based Engineering in Challenging Environments Controlling the Risks to the Public from the Consequences of Large Rocket Launch Failures |
786 | Capability Investment Strategy to Enable JPL Future Space Missions |
794 | Performance-Based Engineering for Lunar Settlements |
802 | Toward System Performance Standards for Infrastructure Systems Impacted by Natural Hazards |
810 | Remote Sensing and Space-Based Technologies for Earth Science SEDRIS: A Tool for the Management and Exchange of Multi-Domain Environmental Data |
818 | Application of the Spatial Reference Model to Precision Coordinate Transformation |
826 | Detection of Sediment Disaster Due to the 2000 Tokai Heavy Rainfall Using High Resolution Satellite Images |
834 | Fusion and Visualization of 3D Image Elevation Data in Computer Automated Virtual Environment (CAVE) |
841 | Wind Engineering in Urban Planning and Design Work of the ASCE Task Committee on Urban Aerodynamics |
847 | Natural Ventilation in Residential Subdivisions |
854 | Wind Engineering in Large Scale Urban Design |
861 | Strategies for Natural Ventilation of Urban Office Buildings |
869 | CFD in Urban Aerodynamics: Wind Speed Conditions in Passages between Parallel Buildings |
877 | Wireless Technology in Construction A Framework for Real-Time Construction Project Progress Tracking |
885 | A Survey of the Use of Wireless and Web-Based Technologies in Construction |
893 | Effective Processing of GPR Data to Investigate the Sub-Space |
901 | Ubiquitous Communication to Link Islands of Information in Construction |
908 | ISRUs on Moon and Mars Create Synergistic Interdependencies |
916 | Architecture and Engineering for Extreme Environments Architecture for Space and Extreme Terrestrial Environments Autonomous Architecture Proposal for Summit Science Station in Greenland |
925 | A Low-Thrust Transportation Architecture to Transfer Crews and Cargo between Earth and Mars Orbits |
933 | Multipurpose Module for Space Explorations: Design of Hab/Lab Unit for Lunar/Mars Missions |
941 | Interior Accommodations and System for Lunar and Mars Habitats: Design Innovations of the Sleeping Compartments in Mars Transfer Module |
946 | Concepts for Autonomous Explorations Ascent and Earth Reeentry Crew Descent Vehicle Concepts for Lunar and Mars Exploration |
953 | Project Arusha: Pressurized Rover Systems |
961 | A Mapping Balloon for Future Robotic and Human Lander Missions to Mars |
969 | A Moon-Micro-Mission (MMM) |
977 | Conceptual Architecture for Space Exploration Design Concepts for Space Settlements |
986 | A Spiral Approach for Development of Lunar and Martian Exploration Using Crew Exploration Vehicle |
994 | Kalpana One: A New Space Colony Design |
1002 | Architecture for Protracted Exploration |
1010 | Engineering and Construction in Challenging Terrestrial Environments Construction in Challenging Environments Using Intelligent Techniques |
1019 | Investigating Subsurface Conditions in Bouldery Terrain—Lessons from the Field |
1027 | Space Design and the Lessons of Experimental Architecture |
1032 | Providing Situational Awareness for Systems Operating in Harsh, Remote Environment Technology Readiness of a Modulated Laser Analyzer of Combustion Products for the Manned Spacecraft Environment |
1040 | Structures and Materials Analysis and Design of Innovative FRP Structural Systems Strengthening and Rehabilitation of Concrete Structures with Carbon Fiber Reinforced Polymers (CFRP) |
1048 | Polymer Matrix Composite Panels for Seismic Energy Dissipation |
1057 | Effectiveness of FRP Wrap for Temporary Repairs in R/C Bridge Column Applications |
1062 | Impact Response of Elastic and Elastic-Plastic Sandwich Beams |
1070 | Application of Smart Structures Seismic Behavior of Low-Rise Shear Walls with SMA Bars |
1078 | Comparison of Analytical Approaches to Structural Model Updating Using Modal Test Data |
1086 | Experimental Investigation on Self-Rehabilitation of Intelligent Concrete Beams Reinforced with Superelastic Shape Memory Alloys |
1093 | Dynamic Behavior of a Two-Story Building Frame Braced with SMA for Vibration Control |
1102 | Ballistic Impact of Composite Incorporation of the Effects of Temperature and Unloading into the Strain Rate Dependent Analysis of Polymer Matrix Materials Utilizing a State Variable Approach |
1110 | Multiscale Numerical Simulation of High-Velocity Impact on Polymer Matrix Composite Laminates |
1118 | A Modified State Variable Polymer Model Implementation in LS-DYNA |
1126 | Ballistic Impact Testing of Composite Structures |
1136 | Composites New Glass Fiber Reinforced Concrete for Extraterrestrial Application |
1144 | Investigation of Bending/Buckling Characteristics for FRP Composite Poles |
1162 | Effect of Graphite Nanoplatelet Loading on the Microcrack Mitigation Capabilities of Composite Structures |
1170 | Creative Applications of Structural Engineering Structural Design of a Unique Passive Telescope |
1178 | Online Actuator Failure Detection Using Direct Approach |
1186 | Damping and Viscoelasticity Next Generation Vibration Damping Materials: Route Map and Forecast |
1194 | Experimental Methods for the Viscoelastic Characterization of an Elastic Memory Composite Resin |
1202 | Performance Verification of Smart Passive Damping System Attached to Stay Cable |
1210 | Experimental Study on Torsional Response Control of Frame-Shear Wall Eccentric Structure Using MR Dampers |
1218 | Dynamics and Controls of Structures Identification of Modal Parameters for Close-Mode Structures with Output-Only Data |
1226 | Control of Tuned Liquid Dampers for Wind-Induced Skyscraper Vibration |
1234 | High Accuracy GPS Deformation Monitoring via Errors Cancelling by ANC and Wavelet Analysis |
1242 | Conceptual Modelling of Damping of CNT-Reinforced Materials |
1250 | Infrastructure Materials Numerical Simulation of Aggregate Shape of Concrete |
1258 | Theoretical and Numerical Study of Mechanic Performance of Asphalt Concrete Bridge Deck Pavement |
1264 | Numerical Simulation of the Uniaxial Failure of Three-Grading Concrete Based on Micro Damage |
1272 | Behavior of High Performance Concrete Exposed to Internal Sulfate Attack (Gypsum-Contaminated Aggregate) |
1278 | Prediction of Ultimate Shrinkage and Shrinkage Half-Time for Concrete Poured in Hot Climates: Development of the ACI 209 Committee Shrinkage Model |
1286 | Mechanics of Advanced Materials and Structures Structural Weight Optimization with Tabu Search |
1294 | Behavior of Piezoresistive Cement Based Materials |
1302 | Modeling and Failure Analysis of Elastic-Plastic Sandwich Beams |
1310 | A New Bernoulli-Euler Beam Model Based on a Modified Couple Stress Theory |
1319 | Seismic Response and Considerations Long-Span Bridge Dynamic Response due to Ground Motions Considering Phase Differences |
1327 | Seismic Response of Buried Pipelines during Liquefaction |
1335 | Finite Element Analysis Model of High Cycle Fatigue Damage for Metal Structure |
1342 | Experimental Study on Aseismic Characteristics of RC Shear Walls with Diagonal Profile-Steel Bracings |
1350 | Smart Materials Optical Fiber Grating Sensors |
1358 | Vibration Suppression of Flexible-Link Manipulator by PZT Actuators and Sensors |
1366 | Structural Health Monitoring In-Situ Damage Detection of Wharf Structures Using Local Damage Factor |
1374 | Structural Health Monitoring for LRT Underground Tunnel Liner |
1382 | Damage Detection Algorithms and Sensor Systems for Laminate Composite Beams |
1390 | Performance of Smart Peizoelectric Transducers for Structural Health Monitoring on Composite Laminates in a Wide Range of Temperature Environments |