ASME B107.110 2012
$98.04
ASME B107.110 Socket Wrenches, Handles, and Attachments
| Published By | Publication Date | Number of Pages |
| ASME | 2012 | 76 |
This Standard provides performance and safety requirements for socket wrenches (sockets), handles used with these wrenches, nutdrivers, and attachments used with socket wrenches, hereinafter collectively referred to as tools. Inclusion of dimensional data in this Standard is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes and lengths Note: This Standard is a consolidation of ASME B107.1, B107.2, B107.10, B107.12, and B107.34.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 5 | CONTENTS |
| 8 | FOREWORD |
| 9 | ASME B107 COMMITTEE ROSTER |
| 10 | CORRESPONDENCE WITH THE B107 COMMITTEE |
| 11 | 1 SCOPE 2 REFERENCES 3 CLASSIFICATION 4 PERFORMANCE REQUIREMENTS 4.1 Design 4.1.1 Nut-End Socket Opening. |
| 12 | 4.1.2 Bolt Clearance Hole for Category 1 and Category 2 Sockets. 4.1.3 Drive Ends. 4.1.4 Countersink of Nut-End Socket Opening. 4.2 Materials 4.3 Marking 4.4 Hardness 4.5 Finish 4.5.1 Surface Finish. 4.5.2 Coatings. 4.6 Universal Joint Sockets Categories 1, 2, and 34 |
| 13 | 5 TESTS 5.1 Hardness 5.2 Proof Torque Test 5.2.1 Mandrels for Nut End Socket Openings. 5.2.2 Application of Test Loads. 5.3 Alternative Coating Tests 5.3.1 Samples. 5.3.2 Adhesion Test. 5.3.3 Abrasion Test. 5.3.4 Corrosion Test. 5.4 Pin Removal Test: Category 1, Type III and Category 34, Type II Universal Joint Sockets 6 SAFETY REQUIREMENTS AND LIMITATIONS OF USE |
| 14 | Category 1 Hand Driven Socket Wrenches 1-1 CLASSIFICATION 1-2 PERFORMANCE REQUIREMENTS 1-2.1 Design 1-2.2 Hardness |
| 15 | Figures Fig. 1-1 Type I Sockets and Type II Sockets |
| 16 | Fig. 1-2 Type III Universal Joint Sockets |
| 17 | Tables Table 1-1 Type I Sockets, Single and Double Hexagon, 1’4 in. Drive Table 1-1M Type I Sockets, Single and Double Hexagon, 1’4 in. Drive |
| 18 | Table 1-2 Type I Sockets, Single and Double Hexagon, 3’8 in. Drive Table 1-2M Type I Sockets, Single and Double Hexagon, 3’8 in. Drive |
| 19 | Table 1-3 Type I Sockets, Single and Double Hexagon, 1’2 in. Drive |
| 20 | Table 1-3M Type I Sockets, Single and Double Hexagon, 1’2 in. Drive |
| 21 | Table 1-4 Type I Sockets, Single and Double Hexagon, 3’4 in. Drive |
| 22 | Table 1-4M Type I Sockets, Single and Double Hexagon, 3’4 in. Drive |
| 23 | Table 1-5 Type I Sockets, Single and Double Hexagon, 1 in. Drive |
| 24 | Table 1-5M Type I Sockets, Single and Double Hexagon, 1 in. Drive Table 1-6 Type II Sockets, Square, 4-Point and 8-Point, 1’4 in. Drive |
| 25 | Table 1-7 Type II Sockets, Square, 4-Point and 8-Point, 3’8 in. Drive Table 1-8 Type II Sockets, Square, 4-Point and 8-Point, 1’2 in. Drive |
| 26 | Table 1-9 Type III Sockets, Universal Joint, Single and Double Hexagon, 1’4 in. Drive Table 1-9M Type III Sockets, Universal Joint, Single and Double Hexagon, 1’4 in. Drive |
| 27 | Table 1-10 Type III Sockets, Universal Joint, Single and Double Hexagon, 3’8 in. Drive Table 1-10M Type III Sockets, Universal Joint, Single and Double Hexagon, 3’8 in. Drive |
| 28 | Table 1-11 Type III Sockets, Universal Joint, Single and Double Hexagon, 1’2 in. Drive Table 1-11M Type III Sockets, Universal Joint, Single and Double Hexagon, 1’2 in. Drive |
| 29 | Category 2 Socket Wrenches, Extensions, Adaptors, and Universal Joints, Power Drive Impact 2-1 CLASSIFICATION 2-2 PERFORMANCE REQUIREMENTS 2-2.1 Design 2-2.1.1 Type I and Type VII Sockets, Single Hexagon 6-point and Double Hexagon 12-Point and Type II Sockets, Single Square 4-Point and Double Square 8ÃPoint. 2-2.1.2 Type III, Universal Sockets, Single 6-Point and Double 12-Point Hexagon. 2-2.1.3 Type IV, Extension Bars. 2-2.1.4 Type V, Adaptors. 2-2.1.5 Type VI, Universal Joints. 2-2.2 Hardness 2-2.3 Bolt Clearance Hole |
| 30 | Fig. 2-1 Type I, II, and VII Sockets |
| 31 | Fig. 2-2 Type III, Universal Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point) Fig. 2-3 Type IV, Bar Extension Fig. 2-4 Type V, Adaptor Fig. 2-5 Type VI, Universal Joint |
| 32 | Table 2-1 Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 1’4 in. Drive Table 2-1M Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 1’4 in. Drive |
| 33 | Table 2-2 Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 3’8 in. Drive Table 2-2M Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 3’8 in. Drive |
| 34 | Table 2-3 Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 1’2 in. Drive |
| 35 | Table 2-3M Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 1’2 in. Drive |
| 36 | Table 2-4 Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 3’4 in. Drive |
| 37 | Table 2-4M Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 3’4 in. Drive |
| 38 | Table 2-5 Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 1 in. Drive |
| 39 | Table 2-5M Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 1 in. Drive |
| 40 | Table 2-6 Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 11’2 in. Drive |
| 42 | Table 2-7 Type I Sockets, Single Hexagon (6-Point), 21’2 in. Drive |
| 43 | Table 2-8 Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), Thin Wall, 1’2 in. Drive |
| 44 | Table 2-9 Type I Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), Thin Wall,3’4 in. Drive Table 2-10 Type II Sockets, Single Square (4-Point) and Double Square (8-Point), 3’8 in. Drive |
| 45 | Table 2-11 Type II Sockets, Single Square (4-Point) and Double Square (8-Point), 1’2 in. Drive Table 2-12 Type II Sockets, Single Square (4-Point) and Double Square (8-Point), 3’4 in. Drive |
| 46 | Table 2-13 Type VII Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), #5 Spline Drive |
| 47 | Table 2-14 Type III Universal Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 3’8 in. Drive Table 2-14M Type III Universal Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 3’8 in. Drive |
| 48 | Table 2-15 Type III Universal Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 1’2 in. Drive Table 2-15M Type III Universal Sockets, Single Hexagon (6-Point) and Double Hexagon (12-Point), 1’2 in. Drive |
| 49 | Table 2-16 Type IV, Bar Extension Table 2-17 Type V, Adaptors Table 2-18 Type VI, Universal Joint |
| 50 | Category 10 Handles and Attachments for Hand Socket Wrenches 10-1 CLASSIFICATION 10-2 PERFORMANCE REQUIREMENTS 10-2.1 Design, Type I, Handles 10-2.1.1 Class 1, Hinged Illustration in Table 10Ã1. 10-2.1.2 Class 2, Ratchet, Reversible Illustration in Table 10-2. 10-2.1.3 Class 3, Speeder. 10-2.1.4 Class 4, T-Handle, Sliding Illustration in Table 10Ã5. 10-2.2 Design, Type II, Attachments 10-2.2.1 Class 1, Universal Joint Illustration in Table 10Ã6. |
| 51 | 10-2.2.2 Class 2, Extension Bar. 10-2.2.3 Class 3, Adaptor 10-2.3 Hardness 10-3 TESTS 10-3.1 Adaptor Attachments 10-3.2 T-, Sliding, and Ratchet Handles 10-3.3 Speeder Handles 10-3.4 Hinged Handles 10-3.5 Reverse Torque, Ratcheting, Type I, Class 2 Handle, Ratchet, Reversible; and Type II, Class 3, Style B, Attachment, Adaptor, Ratchet, Socket Wrench 10-3.6 Drop Test, Type I, Class 2, Ratchet, Reversible 10-3.7 Thrust Load Test 10-3.8 Pull Test |
| 52 | 10-3.9 Pin Removal Test 10-3.10 Cycle Test Table 10-1 Type I, Class 1, Handles, Hinged |
| 53 | Table 10-2 Type I, Class 2, Handles, Ratchet, Reversible |
| 54 | Table 10-3 Type I, Class 3, Style A, Handles, Speeder, Brace Type, Single Revolving Handgrip Table 10-4 Type I, Class 3, Style B, Handles, Speeder, Spin Type, Screwdriver Grip |
| 55 | Table 10-5 Type I, Class 4, Handles, T, Sliding Table 10-6 Type II, Class 1, Attachments, Universal Joint |
| 56 | Table 10-7 Type II, Class 2, Style A, Attachments, Extension Bar, Solid |
| 57 | Table 10-8 Type II, Class 2, Style B,Attachments, Extension Bar, Flexible Table 10-9 Type II, Class 3, Style A, Attachments, Adaptor, Socket Wrench |
| 58 | Table 10-10 Type II, Class 3, Style B, Attachments, Adaptor, Ratchet |
| 59 | Category 12 Nutdrivers 12-1 CLASSIFICATION 12-2 PERFORMANCE REQUIREMENTS 12-2.1 Design 12-2.1.1 Type I, Class 1: Conventional Length — Solid Shaft. 12-2.1.2 Type I, Class 2: Conventional Length –Hollow Shaft. 12-2.1.3 Type II: Stubby Length. 12-2.1.4 Type III: Miniature Handle. 12-2.2 Handles 12-2.2.1 Color Coding. |
| 60 | 12-2.2.2 Handle Shape and Finish. 12-2.2.3 Handle With Internal Drive. 12-2.2.4 Cushion Grip. 12-3 TESTS 12-3.1 Torsional Moment Test 12-3.2 Bending Moment Test 12-3.3 Solvent Tests |
| 61 | Fig. 12-1 Type I, Class 1, Styles A and B: Conventional Length Nutdriver With Solid Shaft Table 12-1 Type I, Class 1, Styles A and B: Conventional Length Nutdriver With Solid Shaft Table 12-1M Type I, Class 1, Styles A and B: Conventional Length Nutdriver With Solid Shaft |
| 62 | Fig. 12-2 Type I, Class 2: Styles A and B: Conventional Length Nutdriver With Hollow Shaft Table 12-2 Type I, Class 2, Styles A and B: Conventional Length Nutdriver With Hollow Shaft Table 12-2M Type I, Class 2, Styles A and B: Conventional Length Nutdriver With Hollow Shaft |
| 63 | Fig. 12-3 Type II, Styles A and B: Stubby Length Nutdriver Table 12-3 Type II, Styles A and B: Stubby Length Nutdriver Table 12-3M Type II, Styles A and B: Stubby Length Nutdriver |
| 64 | Fig. 12-4 Type III: Miniature Handle Nutdriver Table 12-4 Type III: Miniature Handle Nutdriver Table 12-4M Type III: Miniature Handle Nutdriver |
| 65 | Fig. 12-5 Torsional Moment Test |
| 66 | Table 12-5 Torsional Moment Test: Hexagonal Mandrel Dimensions and Maximum Depth of Mandrel Insertion Table 12-5M Torsional Moment Test: Hexagonal Mandrel Dimensions and Maximum Depth of Mandrel Insertion |
| 67 | Fig. 12-6 Bending Moment Test |
| 68 | Category 34 Spark Plug Socket Wrenches 34-1 CLASSIFICATION 34-2 PERFORMANCE REQUIREMENTS 34-2.1 Design 34-2.1.1 Clearance Hole. 34-2.1.2 Retaining Device. 34-2.2 Hardness |
| 69 | Fig. 34-1 Socket Wrenches for Spark Plugs |
| 70 | Table 34-1 Type I, Class 1, Spark Plug Socket, Regular Length, Single Hexagon Table 34-1M Type I, Class 1, Spark Plug Socket, Regular Length, Single Hexagon Table 34-2 Type I, Class 2, Spark Plug Socket, Long Length, Single Hexagon Table 34-3 Type II, Class 1, Universal Spark Plug Socket, Square Block, Single Hexagon, 3’8 in. Drive |
| 71 | Table 34-4 Type II, Class 2, Universal Spark Plug Socket, Ball Swivel, Single Hexagon, 3’8 in. Drive Table 34-5 Depth of Mandrel Insertion |
| 73 | NONMANDATORY APPENDIX A DESIGNATIONS |
